Energy storage

Photovoltaic

Single-phase all-in-one | Hybrid inverter & solar battery

The all-in-one solution to produce, store and manage your solar energy independently.

Poolex All-in-One solar battery and inverter: self-consumption, energy storage, 20 ms backup. 5, 10 or 15 kWh configurations.

Réduisez vos factures

Valorisez durablement votre maison

Réduisez votre empreinte carbone

Guarantees

10years

Hybrid inverter

10years

Batteries

25years

Panel

Store locator

Download the product sheet

Poolex Solar

All-In-One

Single-phase

Produce, store and consume your solar energy — for your home, your pool, and round-the-clock energy independence.

Our 3 configurations

5kWh

Hybrid inverter × 1

BMS management unit × 1

Battery pack × 1

Base unit × 1

10kWh

Hybrid inverter × 1

BMS management unit × 1

Battery pack × 2

Base unit × 1

15kWh

Hybrid inverter × 1

BMS management unit × 1

Battery pack × 3

Base unit × 1

The optimal configuration will be determined based on your energy assessment.

HOW DOES IT WORK?

The panels generate electricity, converted by the inverter to directly power your equipment (pump, heat pump, robot...).

Energy consumption is measured at the meter. In the event of a solar surplus, the energy is stored in the batteries first. Once they are full, the surplus can be fed back into the grid and sold under a feed-in tariff agreement.

In the event of a power outage, the system automatically switches to backup mode in under 20 ms. The batteries instantly take over to keep priority equipment running, with no action required from the user.

DC line

AC line

View the full product sheet

CONTROL YOUR SYSTEM FROM YOUR SMARTPHONE

The Solarman Smart app gives you full control of your All-in-One, wherever you are.

Real-time monitoring: status, output, load, flows

Local Bluetooth control, remote operation

Self-use, TOU, Peak Shaving, Backup modes

Modes: Self-use, TOU (Time-of-Use), Peak Shaving or Backup

Battery settings: min/max SOC, priorities, standby

Firmware updates

Solarman Smart

MAXIMUM SAFETY

5-level cell protection

Advanced thermal management

Complete system protection

Built-in surge arresters:
DC type III / AC type II

Backup in under 20 ms

In the event of a grid outage, the system automatically switches to backup mode, with no manual intervention required.

Our All-in-One kits with solar panels

FOCUS ON

THE 500Wp PHOTOVOLTAIC PANELS

Full technical data sheet

All-in-One technical parameters

PHOTOVOLTAIC INPUT
Max. recommended PV power (kWp)	9 (4.5 / 4.5)
Max. DC voltage (V)	600
Nominal DC operating voltage (V)	360
MPPT voltage range (V)	100 - 540
MPPT voltage range at rated power (V)	185 - 480
Start-up voltage (V)	120
Max. input current (A/B) (A)	15 / 15
Max. short-circuit current (A/B) (A)	18 / 18
Number of MPPT trackers / strings per MPPT tracker	2 / 1
BATTERY SIDE
Battery voltage range (V)	85 - 400
Battery voltage range at rated power (V)	225 - 400
Recommended battery voltage (V)	300
Max. charge/discharge current (A)	25 / 25
Communication interfaces	RS485 / CAN
Reverse polarity protection	Yes
AC GRID SIDE (GRID-CONNECTED MODE)
Rated AC output power (W)	5,000
Max. output power (W)	5,000
Rated apparent power fed into the grid (VA)	5,000
Max. apparent power fed into the grid (VA)	5,000
Rated apparent power drawn from the grid (VA)	5,000
Max. apparent power drawn from the grid (VA)	6,000
Rated grid voltage (V)	L/N/PE 230 V AC
Grid voltage range (V)	180 - 280
Rated grid frequency (Hz)	50
AC grid frequency range (Hz)	50 ± 5
Max. AC current fed into the grid (A)	21.7 A AC
Rated AC current fed into the grid (A)	21.7 A AC
Rated AC current drawn from the grid (A)	21.7 A AC
Max. AC current drawn from the grid (A)	26.1 A AC
Power factor	≈ 1 (adjustable from 0.8 capacitive to 0.8 inductive)
Current THD (%)	< 5% at rated power
EPS BACKUP OUTPUT
Rated backup apparent power (VA)	5,000
Rated power (W)	5,000
Max. apparent power off-grid (VA)	7,500 for 10 sec
Max. apparent power on-grid (VA)	7,500 for 10 sec
Rated output voltage (V)	L/N/PE 230 V AC
Rated output frequency (Hz)	50
Rated output current (A)	21.7
Max. output current (A)	21.7
Output overcurrent protection (A)	32.6 for 10 s
Grid/off-grid switching time (ms)	< 20
Output THD (%)	< 5% (linear load)
EFFICIENCY
MPPT efficiency (%)	99.9
European efficiency (%)	95.2
Max. efficiency (%)	96.7
Battery charge/discharge efficiency (%)	97.6 (PV → BAT), 96.0 (BAT → AC)
ENVIRONMENTAL CHARACTERISTICS
Protection rating	IP65
Protection class	Class I
Pollution degree	PD3
Overvoltage category	III (grid), II (DC)
Operating temperature (°C)	-20 to +60 (derated above +45)
Max. operating altitude (m)	< 2,000
Relative humidity	0 - 100%
Cooling method	Natural convection
User interface	LED, mobile app
Communication with the BMS	CAN / RS485
Communication with the meter	RS485
Communication with the monitoring portal	Wi-Fi
Typical noise level (dB)	< 40
Dimensions (W × H × D) (mm)	800 x 450 x 160
Weight (kg)	34
Topology	Non-isolated
Night-time self-consumption (W)	< 25
DC connector	MC4 (4 to 6 mm²)
AC connector	Quick Plug
Standard warranty (years)	10

Battery technical parameters

Model	5 kWh	10 kWh	15 kWh
Composition	Base unit + BMS + 1 module	Base unit + BMS + 2 modules	Base unit + BMS + 3 modules
Battery capacity	5 kWh	10 kWh	15 kWh
Number of battery modules	1	2	3
Rated voltage (V)	102.4	204.8	307.2
Max. protection voltage (V)	116.8	233.6	350.4
Min. protection voltage (V)	89.6	179.2	268.8
Rated capacity (Ah)	50
Total energy (kWh)	5.1	10.2	15.3
Rated power (kW)	2.56	5.12	7.68
Rated charge/discharge current (A)	25
Max. charge/discharge current (A)	25
Cycle life	6,000 cycles (@ 0.5C, 90% DoD, 25°C, 70% SoH)
Estimated lifespan	10 years (70% SoH)
Operating temperature (°C)	-20 to +55°C (derated above +45°C)
Storage temperature (°C)	-20 to +55°C (1 month) -20 to +45°C (3 months) -20 to +35°C (1 year)
Max. altitude (m)	< 2,000
Protection rating	IP65
System/inverter communication	RS485 / CAN 2.0
Battery-to-battery / BMS communication	Daisy-chain connection
Display interface	LED
Power on/off	1 button + 1 circuit breaker
Certifications	CE, IEC 62619, IEC 62040, IEC 60529, IEC 61000, UN38.3
Weight (kg)	69 ± 4	124 ± 6	186 ± 6
Overall dimensions (W × H × D) (mm)	(800±20)x(530±30)x(160±20)	(800±20)x(840±30)x(160±20)	(800±20)x(1240±30)x(160±20)
Configuration	1 series

1 The maximum input voltage corresponds to the upper limit allowed for DC voltage. Any higher DC voltage may damage the inverter.
2 An input voltage outside the MPPT range may trigger the inverter's protection systems.

Standards and certifications

Safety	IEC / EN 62109-1&2, IEC62477
Electromagnetic compatibility (EMC)	IEC61000-6-1, IEC61000-6-3, AS / NZS 61000.6.3, AS / NZS 61000.6.1
Environment	IEC60529, IEC60068
Efficiency	IEC61683
Certifications	AS / NZS 4777.2, NRS 097-2-1, EN50549-1, G99, G98, CEI0-21, VDE-AR-N 4105

Our resellers are at your side

Request a quote

Single-phase all-in-one | Hybrid inverter & solar battery

The all-in-one solution to produce, store and manage your solar energy independently.

Poolex All-in-One solar battery and inverter: self-consumption, energy storage, 20 ms backup. 5, 10 or 15 kWh configurations.

All-In-One

Single-phase

Our 3 configurations

HOW DOES IT WORK?

CONTROL YOUR SYSTEM FROM YOUR SMARTPHONE

MAXIMUM SAFETY

5-level cell protection

Advanced thermal management

Complete system protection

Backup in under 20 ms

Our All-in-One kits with solar panels

THE 500Wp PHOTOVOLTAIC PANELS

Full technical data sheet

Our resellers are at your side

Heat

Filter

Maintain