Still as efficient, the new Poolex Jetline Selection Fi and its unmatched price/quality/efficiency ratio. remains a reference amongst swimming pools heat pumps.
In adhering to every manufacturing standard, the Jetline Selection Fi ensures itself a place on the heat pump podium year after year.
Whether you are building a new swimming pool or renovating it, it is the heat pump of choice. Once your project done, your new heat pump will surprise you not only by its performance, but also with the fact that you were able to stay within budget. You’ll still have enough money to buy a bottle of bubbly to celebrate!
The Jetline Selection Fi is one of the first Poolex heat pumps to have adopted cutting-edge Full Inverter technology. With this, it has the capacity to modulate its compressor and ventilator speed to adapt itself according to the temperature required. This constant regime avoiding any peak results in an important reduction of electrical consumption.
By preventing the heat pump from running at full regime, Full Inverter technology also considerably reduces noise level. The Jetline Selection Fi is a silent heat pump.
Thanks to its reversible mode, you will be able to heat your pool in the spring and cool it down during the hottest hours of the summer. An important element knowing that algae feel right at home in warmer waters.
With its wide hydrophilic aluminium evaporation surface area, the Poolex Jetline Selection Fi operates at an outside temperature as low as -7°C.
Do you know the "Cruise Control" in a car? It automatically modulates its performance according to the set speed. No jerking and no over-consumption.
With Full Inverter technology, two main components of the heat pump have the ability to adapt their frequency and speed of operation to the actual conditions. The Poolex Silent Max full inverter heat pump modulates its output according to heating needs. This prevents peaks in consumption and reduces your energy consumption.
Its fan, in turn, adapts to the effort provided by the compressor. With these two elements able to modulate their level of operation, your heat pump runs in a constant and controlled manner. You benefit from an economical and ultra-quiet equipment.
The Jetline Selection Fi swimming pool heat pump is equipped with a compressor from the renowned Mitsubishi brand.
This rotary inverter compressor operates at low speed and avoids any peak in consumption.
Popular in the hardware and decoration industry, ABS has demonstrated good resistance to exterior elements without any compromises to its decorative attributes.
As a light heat pump, the Jetline Selection Fi is easily installed in your technical room.
The technologies that make the Jetline Selection Fi turn it into a heat pump able to meet most swimming pool owners’ requirements.
Equipped with a Rotary Inverter compressor, this model comes in 5 capacities to heat up swimming pools from 30 to 110 m3.
Its COP greater than 6, particularly important for high power heat pumps, also benefits the models in the range intended for small swimming pools. You benefit from all the advantages of a pump belonging to an advanced range.
Because a heat pump, regardless of its capacity, must be as easy to use, Poolex equips all its heat pumps with the WIFI functionnality. All information displayed on the control panel is also available on your smartphone.
Model | Jetline Selection Fi 75 | Jetline Selection Fi 95 | Jetline Selection Fi 125 | Jetline Selection Fi 155 | Jetline Selection Fi 210 | |
---|---|---|---|---|---|---|
Pool volume (m3) | From 35 to 45 | From 40 to 50 | From 45 to 65 | From 65 to 80 | From 80 to 110 | |
Condition: Air 26°C Water 26°C Hygro 80% |
Max. Output power (kW) | 7.1 | 9.5 | 11.9 | 15.3 | 20.1 |
Min. Output power (kW) | 2.04 | 2.3 | 2.35 | 2.5 | 2.77 | |
COP | 13.6~6.2 | 14~6.3 | 16.4~6.2 | 16.3~6.1 | 16.5~6.2 | |
Condition*: Air 15°C Water 26°C Hygro 70% |
Max. Output power (kW) | 5.4 | 6.7 | 8.7 | 10.9 | 14.6 |
Min. Output power (kW) | 1.4 | 1.5 | 1.7 | 1.9 | 2.15 | |
COP | 6.5~4.7 | 6.6~4.5 | 7.8~4.6 | 7.7~4.6 | 7.9~4.6 | |
Power supply | Mono 230 V / 50 Hz | |||||
Heating temperature range | 15°C~ 40°C | |||||
Cooling temperature range | 8°C~ 28°C | |||||
Operating range | -7°C~ 43°C | |||||
Flow (3/h) | 2~4 | 3~4 | 4~6 | 5~7 | 7~9 | |
Refrigerant | R32 | |||||
Packaging dimensions (mm) | 886x404x778 | 969x404x778 | 1166x424x878 | |||
Dimensions (mm) | 824x334x656 | 907x334x656 | 1104x354x756 | |||
Net weight (kg) | 36.8 | 37.7 | 42.5 | 46.2 | 57.4 | |
Noise at 1 m (db(A)) | 37~50 | 37~51 | 38~52 | 40~54 | 41~55 | |
Noise at 10 m (db(A)) | 19~29 | 19~30 | 21~31 | 23~34 | 23~35 | |
Compressor type | Hermetic Rotary DC Inverter | |||||
Compressor brand | Mitsubishi | |||||
Heat exchanger | Twisted Tech©Titanium | |||||
Operation | (Full Inverter) Auto / Heating / Cooling - Boost, eco |