Patented antifreeze system WiFi technology Silent

Why choose Spawer spa heat pump Ice Spa

The IceSpa is a heat pump for spas especially conceived for the most extreme climate.

Do you dream of enjoying the benefits of a warm bubble bath and its massaging jets surrounded by snow-capped peaks?
Thanks to its patented Poolex defrosting system, the Spawer Ice Spa operates at temperatures as low as -25°C.

Cutting edge Full Inverter technology on this heat pump dedicated to spas reduces your energy consumption by up to 80% compared with an electric heater!

The Ice Spa is easy to install with a Plus & Play system. It connects easily to the spa's hydraulic system.

Ideal for spas up to 1.5 m3, swim spas and nordic baths.

Enjoy your spa while reducing your electricity bill

Heating the water in the bath is the biggest expense for a spa. Over the year, for a typical spa, you can expect to spend more than €500* on electricity.

The spa water is heated by an electric heater. On average, it uses kW 203 per month. While the Spawer heat pump only uses kW 41 to 29*.

How is it possible? The Spawer Ice Spa features Poolex's flagship Full Inverter technology. Like a car's automatic pilot, this type of spa heat pump constantly regulates its power according to heating or cooling needs. So there's never a peak in consumption.

For every kilowatt heated, the heater consumes 1 kW. A heat pump, on the other hand, uses around 0.2 kW thanks to its coefficient of performance**.

* Approximate estimate for a 5-person spa with a 1,000-litre volume.
** Estimate for a heat pump with an average COP of 5

With the reversible mode, cooler water when it is warmer outside

The warmer weather means you'll be just as keen to enjoy your spa. The days are getting longer, the evenings are getting more organised: it's the perfect opportunity to share a moment with your loved ones.

But at higher ambient temperatures, the water in your spa may seem a little too hot. Thanks to the Spawer's reversible mode, you can avoid wasting water by partially draining the bath to add fresh water. Simply select the Cooling mode.

In the middle of a busy day, I log on and manage my spa

A change of programme in the middle of the day? In the end, you'll want to spend an evening relaxing in your spa.

This is the time to connect to your app and check that all the settings are a “go”. You may want to change the water temperature or the operating mode.

This is the time to connect to your app and check that all the settings are a “go”. You may want to change the water temperature or the operating mode.

You can even programme your Spawer's operating times.

Need some help?

Find your heat pump

Let us guide you

Model Spawer IceSpa 5kW
Reference PC-ICSPA50
Capacity ≤ 5 kW
Climate Extreme
Air 26°C
Water 26°C
Hygro 80%
Capacity (kW) 5.38~2.50
Power consumption (kW) 1.01~0.18
COP 5.33~13.89
Air 15°C
Water 26°C
Hygro 80%
Capacity (kW) 4.18~2.01
Power consumption (kW) 0.92~0.27
COP 4.54~7.44
Power supply Mono 220-240V/50Hz
Heating temperature range 10°C ~ 40°C
Cooling temperature range 8°C ~ 28°C
Operating range -25°C ~ 40°C
Max. power (kW) 1.2
Max. current (A) 5.32
Flow (3/h) 2.31
Refrigerant R32
Packaging dimensions (mm) 630 x 480 x 438
Dimensions (mm) 600 x 460 x 423
Net/gross weight (kg) 40 / 43
Noise at 1 m (db(A)) <50
Noise at 10 m (db(A)) <30
Compressor type Rotary
Heat exchanger Twisted Tech© Titanium
Operation Heating / Cooling / Auto
Load loss (mCE) 1.2
Hydraulic connections 32 / 38mm

Heat pump
Against corrosion on the titanium coil


Our resellers are at your side

Request a quote

Accessories included

Find a reseller

A French design

An innovative brand

A dedicated Research & Development department

Modern, distinctive design

Cutting-edge technologies

Forerunner in Full Inverter + energy-saving technology

Wifi remote control

100% French after-sales service

3-year premium warranty

100% FRENCH advice & after-sales service

What do you need for your pool?

Find your nearest reseller